Low Rise Platform Lift (removal)
SCOPE
- To remove a low-rise platform lift and to make good.
PRELIMINARY and GENERAL
- The Housing Modification Schedules shall be read in conjunction with instructions from the Enable New Zealand Equipment Stores and the Agreement for Contractor Services
- Where a site visit has not been undertaken to ascertain the conditions, levels, boundary positions, access etc. no variations will be given by reason of ignorance of the site or existing site conditions
- The low-rise platform lift is to be removed and stored as directed by the Enable New Zealand Equipment Stores
- All work must comply with the relevant conditions of the Building Act and NZ Building Code
- A handrail is to be installed across the opening where the lift has been removed
- Disconnect the electric cable and/or the water pipe from the power outlet and/or water tap
- Leave power outlet and/or the tap. Unbolt the lift from the concrete pad and remove
Note: This must be done as per manufacturer instructions for removal and transporting - Leave the concrete pad in place. Remove the bolts from the concrete slab or cut of to leave flush or below the surface of the concrete pad
- The timber platform is to be left unless instructed otherwise by Enable New Zealand.
COMPLETION
- Clean down all work and leave in a tidy condition ready for use.
NOT INCLUDED
Ministry of Health funding will not cover the following:
- Additional work requested by the property owner and/or the client
- Refurbishment of the whole area
- Repairs and Maintenance.
Phone 0800 17 19 81

